42
Hiding the image
In order to draw the audience's full attention to the presenter, you can press
BLANK
to hide
the screen image. Press any key on the projector or remote control to restore the image.
The
word '
BLANK
' appears at the lower right corner of the screen while the image is hidden.
You can set the blank time in the
BASIC
> Blank Timer
menu
to let the projector return
the image automatically after a period of time when there is no action taken on the blank
screen.
CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the
Panel Key Lock
is on, no
control keys on the projector will operate except
Power
.
1.
Go to the
SYSTEM > Panel Key Lock
menu.
2.
Press
/
to select
On
.
3.
A confirmation message is displayed. Select
Yes
to confirm.
You can also use the remote control to enter the
SYSTEM > Panel Key Lock
menu and
press
/
to select
Off
.
Keys on the remote control are still functional when panel key lock is enabled.
If you press Power to turn off the projector without disabling panel key lock, the projector
will still be in locked status the next time it is turned on.
Operating in a high altitude environment
We recommend you use the
High Altitude Mode
when your environment is between 1500
m–3000 m above sea level, and temperature is between 5°C–25°C.
CAUTION
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 5°C and 35°C. The projector will be over cooled, if you turn the mode on under
such a condition.
To activate the
High Altitude Mode
:
1.
Open the OSD menu and go to the
SYSTEM
>
High
Altitude Mode
menu.
2.
Press
/
to select
On
. A confirmation message is
displayed.
3.
Highlight
Yes
and press
Enter
.
Operation under "
High Altitude Mode
" may cause a higher
decibel operating noise level because of increased fan speed
necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to
High Altitude Mode
to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Summary of Contents for LS800HD
Page 101: ......
