25
ViewSonic
PJ820
Operation
1
Press the MENU button to display the MENU screen.
2
Press the /\ or \/ button to select PICTURE.
Adjustment Item
COLOR
TINT
BRIGHTNESS
CONTRAST
Remarks
S-VIDEO/VIDEO only
NTSC, NTSC 4.43 (S-
VIDEO/VIDEO) only
Adjustment Range
Max. value 63
Min. value 0
Max. value 63
Min. value 0
Max. value 63
Min. value 0
Max. value 63
Adjustment Details
The color becomes darker
The color becomes lighter
Flesh tones become greenish
Flesh tones become reddish
The screen becomes brighter
The screen becomes darker
The screen becomes brighter
and the picture becomes darker
The screen becomes darker and
the picture becomes lighter
The picture quality becomes
sharper
The picture quality becomes
softer
Button
Press the > button
Press the < button
Press the > button
Press the < button
Press the > button
Press the < button
Press the > button
Press the < button
Press the > button
Press the < button
Min. value 0
Max. value 63
Min. value 0
S-VIDEO/VIDEO only
SHARPNESS
Adjusting the picture setting
You can adjust the picture settings for any of the selected input signal sources. The items which can be adjusted
vary depending on the type of input signal. The adjustment procedure below describes the on-screen displays
when a signal is being input to the S-VIDEO IN or the VIDEO IN connectors. To make color adjustments:
5 Press the < or > button to display the COLOR individual
adjustment screen.
6 Continue pressing the < or > button to adjust the color. The
current setting will be displayed on the screen by numerals and a
bar. The adjustment operation and the changes made will vary
depending on which adjustment item is selected. Refer to the
table below for details.
3
Press the < or > button to display the PICTURE screen.
4
Press the /\ or \/ button to select COLOR. If the STD
(Standard) button is pressed while the PICTURE screen shown on
the left appears, the letters STD turn yellow in the top-right corner
of the screen and all settings other than the TV-SYSTEM setting
reset to the factory settings. The values and bar displays for items
which have returned to the factory settings turn yellow.
NOTE: Approximately five seconds after pressing a button while an individual adjustment screen is displayed,
the display returns to the PICTURE screen. Press the MENU button to return the PICTURE screen.
If the STD (Standard) button is pressed while one of the individual adjustment screens is displayed, the value
and the bar display will appear in yellow. Only the displayed item will be reset to the factory setting. If a PAL
or SECAM signal is being input, the TINT item will not appear on the screen.
Summary of Contents for Office Theater PJ820
Page 7: ...ViewSonic PJ820 vi...
Page 23: ...14 ViewSonic PJ820 Getting Started...
