36
Hiding the image
In order to draw the audience's full attention to the presenter, you can press
BLANK
to hide
the screen image. Press any key on the projector or remote control to restore the image.
The
word '
BLANK
' appears at the lower right corner of the screen while the image is hidden.
You can set the blank time in the
SYSTEM SETTING: BASIC > Blank Timer
menu
to
let the projector return the image automatically after a period of time when there is no action
taken on the blank screen.
Once Blank is pressed, the projector enters Eco mode automatically.
CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the
Panel Key Lock
is on, no
control keys on the projector will operate except
Power
.
1.
Press
(
Panel Key Lock
), or go to the
SYSTEM SETTING: ADVANCED >
Advanced > Panel Key Lock
menu
2.
Press
/
to select
On
.
3.
A confirmation message is displayed. Select
Yes
to confirm.
To release panel key lock, press and hold
on the projector for 3 seconds.
You can also use the remote control to enter the
SYSTEM SETTING: ADVANCED >
Advanced > Panel Key Lock
menu and press
/
to select
Off
.
Keys on the remote control are still functional when panel key lock is enabled.
If you press Power to turn off the projector without disabling panel key lock, the projector
will still be in locked status the next time it is turned on.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among
Black
,
Blue
, or
ViewSonic
screen, you can make your own startup screen that is a picture projected from
your computer or video source.
To create your own startup screen:
1.
Project the picture you want to use as your startup screen from either a computer or
video source.
2.
Open the OSD menu and go to the
SYSTEM SETTING: BASIC
>
Screen Capture
menu.
3.
Press
Enter.
4.
A confirmation message displays. Press
Enter
again.
5.
The message 'Screen Capturing...' displays while the projector is processing the
picture. Please wait.
6.
If the action is successful, you see the message 'Captured Succeeded' on the screen.
The captured picture is saved as
Screen Capture
and have been set as your current
startup screen.
Summary of Contents for PRO7827HD
Page 65: ...58 Tripod mount installation 13 00 27 13 Unit mm ...
Page 87: ......
