ViewSonic VA1947a-LED, User Manual

ViewSonic

VA1947a-LED/VA1947ma-LED

6

Quick Installation

1. Connect power cord (and AC/DC 

adapter if required)

2. Connect video cable

• Make sure both the LCD display and 

computer are turned OFF

• Remove rear panel covers if necessary

• Connect the video cable from the LCD 

display to the computer

Macintosh users: 

Models older than G3 

require a Macintosh adapter. Attach the 
adapter to the computer and plug the video

cable into the adapter.

To order a ViewSonic

®

 Macintosh adapter, 

contact ViewSonic Customer Support.

3. Turn ON LCD display and computer

Turn ON the LCD display, then turn ON 
the computer. This sequence (LCD display 
before computer) is important.

NOTE: 

Windows users may receive a 

message asking them to install the INF 
file. This is on the CD.

4. Insert the ViewSonic Wizard CD into 

the computer’s CD drive.

Follow the on-screen instructions. If your 
computer does not have a CD-ROM drive, 
please refer to Customer Support page.

• Wait for the CD-ROM to auto-start.

NOTE:

 If the CD-ROM does not auto-

start: double-click on the CD-ROM icon 
in the Windows Explorer, then double-
click on

 viewsonic.exe

.

• Follow the on-screen instructions.

5. Windows users: Set the timing mode 

(resolution and refresh rate)

Example:

 1366 x 768 @ 60 Hz.

For instructions on changing the 
resolution and refresh rate, see the 
graphics card’s user guide.

Installation is complete. Enjoy your new 
ViewSonic LCD display.

To be best prepared for any future 
customer service needs: print this user 
guide and write the serial number in “For 
Your Records” on page 4. (See back of 
LCD display.)

You can register your product online at the 
ViewSonic website for your region. See 
the Customer Support table in this guide.

The ViewSonic Wizard CD-ROM also 
provides an opportunity for you to print 
the registration form which you may mail 
or fax to ViewSonic.

Power Cord

AC Outlet

(Wall Socket)

Computer Power Cord

Audio In (For VA1947ma-LED only)
D-Sub

AC IN