ViewSonic VA2261H, User Manual

ii

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 

2011/65/EU of the European Parliament and the Council on restriction of the use 

of certain hazardous substances in electrical and electronic equipment (RoHS2 

Directive), and is deemed to comply with the maximum concentration values issued 

by the European Technical Adaptation Committee (TAC) as shown below:

Substance 

Proposed Maximum 

Concentration

Actual Concentration

Lead (Pb)

0.1%

< 0.1%

Mercury (Hg)

0.1%

< 0.1%

Cadmium (Cd)

0.01%

< 0.01%

Hexavalent Chromium (Cr

6+

)

0.1%

< 0.1%

Polybrominated biphenyls (PBB)

0.1%

< 0.1%

Polybrominated diphenyl ethers (PBDE)

0.1%

< 0.1%

Certain components of products as stated above are exempted under the Annex III 

of the RoHS2 Directives as noted below:
Examples of exempted components are:
1. 

Mercury in cold cathode fluorescent lamps and external electrode fluorescent 

lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):
(1) Short length (

≦

500 mm): maximum 3.5 mg per lamp.

(2) Medium length (

＞

500 mm and 

≦

1,500 mm): maximum 5 mg per lamp.

(3) Long length (

＞

1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.
3. 

Lead in glass of fluorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 

85% by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other 

than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or 

ceramic matrix compound.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India) This product complies 

with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent 

chromium, polybrominated biphenyls or polybrominated diphenyl ethers in 

concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for 

the exemptions set in Schedule 2 of the Rule.