Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
2
To highlight a control you want to adjust, press
▲
or
▼
to scroll up or down
the Main Menu.
3
To select the highlighted control, press button [2]. A control screen appears.
4
To adjust the control, press the up
▲
or down
▼
buttons.
5
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1024 x
768 @ 60 Hz to the
LCD display
. (Look for instructions on “changing
the refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display
.)
The line at the bottom of the
screen tells you what you can
do next: Exit this menu or
Select the control that is
highlighted.
ViewSonic Corporation
11
Confidential
– Do Not Copy
V
G500-2
Summary of Contents for VG500-2
Page 25: ...Zfbs0Xfflt 3114012 Tfsjbm Op 11112 ViewSonic Corporation 22 Confidential Do Not Copy VG500 2...
Page 53: ...TP TP TP TP ViewSonic Corporation Confidential Do Not Copy VG500 2 50...
Page 54: ...ViewSonic Corporation 51 Confidential Do Not Copy VG500 2 11 PCB Layout Diagrams...
Page 55: ...ViewSonic Corporation 52 Confidential Do Not Copy VG500 2...
