ViewSonic VG700 - 17" LCD Monitor, User Manual

. (The black border around the 

edge of the screen should barely touch the illuminated “active area” of the 

LCD dislay

.)

The line at the 
bottom of the 
screen tells you
what you can do 
next: Exit or Select 
the control that is 
highlighted.

Main Menu

1:EXIT                                  2:SELECT

Auto Adjust

Contrast/Brightness

Color Adjust

Information

Image Adjust

Setup Menu

Memory Recall

AUTO

SET

i

?

Do the following to adjust the screen image:

1

To display the Main Menu, press button [1]. 

4

To adjust the control, press the up

I

or down

J

buttons.

5

To save the adjustments and exit the menu, press button [1]

twice

.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1280 x 

1024 @ 60 Hz to the 

LCD dislay

. (Look for instructions on “changing the 

refresh rate” in your graphic card's user guide.)

• If necessary, make small adjustments using H. POSITION and V. POSITION 

until the screen image is completely visible

NOTE:

 All OnView menus and adjustment screens disappear automatically 

after about 

15

 seconds. This time period is adjustable through the Setup 

menu and the OSD timeout control described on page 11. 

2

To highlight a control you want to adjust, press 

I

 or 

J

 to scroll up or down 

the Main Menu.

3

To select the highlighted control, press button [2]. A control screen appears 
like the example shown below.

Contrast

1:EXIT                                        2:       Brightness

ViewSonic VG700b

8