- 70 –
ViewSonic Corporation
Confidential - Do Not Cop
VP950b
9. Disassemble Process
9.1 Units
Disassemble
Process
9.1.1
Tools
Glove
Big cross screwdriver
Small cross screwdriver
Prize equipment or abandoned IC card
Screw box
Cushion
Six angle sleeve spanner
9.1.2 Disassemble
process
1
、
Tide up the worktable, spread straight cushion, put the monitor on it, the front side
adown.(
Picture 1
)
2
、
Disassemble the 4 screws that fix the stand, remove the stand. (
Picture 2, 3
)
3
、
Use equipment or abandoned IC card to prize up the bezel through the bottom flute,
and rip up the back cover downwards. refer to the following the
picture 4,5, 6,7
4
、
Remove the bezel, refer to the following
picture 8,9.
5
、
Disassemble the 4 pins of the backlight, as showed in the following the
picture
1011,12.
6
、
Disassemble the 4 fixed screws of the panel, as showed in the following the
picture13 ,14.
7
、
Lift up the main frame and lift down the FFC connectors according to the direction of
the arrowhead, refer to the following
picture 15,16
.
8
、
That’s all. The disassemble process of the unit is over.
9.1.3 Show
pictures
：
（
Picture 1
）
（
Picture 2
）
Summary of Contents for VP950B - 19" LCD Monitor
