31
M
Manual image adjust
Displays the Manual Image Adjust menu. You can manually set a variety
of image quality adjustments.
Multi-picture
Under MULTI-PICTURE MODE you can select the following settings,
QUAD WINDOW, PBP TOP-BOTTOM, PBP LEFT-RIGHT, and PIP. The
explanations for each setting are below.
1. QUAD WINDOWS: You can select four picture split screen type.
2. PBP TOP-BOTTOM: You can select two picture split screen types,
and display two pictures side-by-sides on the top and bottom.
3. PBP LEFT-RIGHT: You can select 2 picture split screen types, and
display 2 pictures side-by-side on the left and right.
4. PIP: Two picture split screen types, display large and the small
pictures on the screen.
5. PIP SIZE: This controls the size of the sub-picture used in PIP.
6. PIP POSITION: This controls the position of sub-picture used in PIP
mode.
7. PIP SWAP: This swaps the main-picture source and the sub-picture
source.
8. SOURCE SELECT: This selects the source of the MULTI-PICTURE
use in the QUAD WINDOW, PBP TOP-BOTTOM, PBP LEFT-RIGHT
and PIP.
Memory recall
Returns the adjustments back to factory settings if the display is
operating in a factory Preset Timing Mode listed in the Specifications of
this manual.
Exception:
This control does not affect changes made with the
Language Select or Power Lock setting
O
Overscan
Can be used to adjust the aspect ratio of the input signal received by
your monitor to adjust the image so it appears on the monitor.
Summary of Contents for VX4380-4K
Page 62: ......
