VIFLY R130
Quick Start Guide
6
/
16
CHARGE THE BATTERY
Plug the power cable to the wall outlet. Voltage from 100v to 240v is accepted.
Connect the battery to the balance charger. “Charger” LED is red when charging the battery, it turns
to green when battery is fully charged.
PREPARE TO FLY
1.
Check the antenna
Make sure the antenna is tightened.
VIFLY R130
Quick Start Guide
11
/
16
6.
Arm the Aircraft (Motor Unlock)
Make sure the throttle stick is all the way down, all switches are in the up position.
Push the throttle stick to the bottom right position and hold for 3 seconds (MODE 2). If you
are MODE 1 user, please refer to MODE 1 diagram.
MODE 1
Right Hand Throttle
MODE 2
Left Hand Throttle
On the aircraft, when the blue LED lights on, the aircraft is armed. Slowly push the throttle
upwards, the aircraft will lift off.
ATTENTION
The motors will spin when the aircraft is armed.
