AGDS-32 User Manual
Vighnaharta Technologies Pvt. Ltd. Page
9
of
14
User Configuration 1 / 2
To select
Zone
configuration, press
Menu1
key.
To select
PINs
configuration, press
Menu2
key.
To select
Timers
configuration, press
Menu3
key.
Zones:
To select
Zone
configuration, press
Menu1
key.
Zones are nothing but wired sensors. User can configure different zones. The system
allows 32 wired zones. User can configure various parameters for zones. While editing the
parameters, use left and right keys for backward and forward movement of cursor and
alpha numeric keys for modifying the text.
The following table explains parameters related to zones.
P a r a m et e r
n a m e
D es c r i p t i o n
D a ta
Zone number
Zone is recognized by the
number as well.
The zone number is two digit number. The
zone number starts from 01 to 32.
Zone Active /
Bypassed
Zone is set as active or
user can bypass it.
Zone Active:
In active condition, it will
show you status of Gas
detectors, alarm gets ON
when gas leak detects.
Zone Bypassed:
In Bypass condition,
system does not consider
whether zone is ON or
OFF.
To bypass the zone, press
M1
key and press
Esc
key. The previous menu appears on LCD.
To activate the zone, press
M1
key. User has
to configure next zone parameters.
Zone name
The
zone name
is name
of the particular zone.
Initially each zone from 01 to 32 is named in
the system by default. User can modify it.
Press Enter key to save the name. When
there is need to navigate left (<) or right (>
) using key “7” and “9” for editing zone
name, user has to press Menu2 first and then
left (<) or right (>) navigation keys.
PINs:
To select
UserPIN
, press
Menu1
key.
PINs
The system allows configuring 8 authenticated
users. Each user has password or PIN.
Enter numbers from 1 to 8 as
desired, and password as 4 digit
numeric characters. Also user
can modify it. Press
Enter
key to
save the PIN.
SELECT OPTIONS:
UserPIN
Set UserPIN (1-8)
User:x PIN:xxxx