Vigilant
MX1-Au
Operator Manual
Document: LT0439
Page
23 October 2018
Issue 1.73
1-10
NUMERIC KEYPAD
For zone and point number, decimal point and other numeric value
entries.
CANCEL
When used in menus requiring user confirmation this key permits an
operator-initiated action to be cancelled without being processed.
Press and hold this key to return the LCD to the base display.
OK
This key is used to confirm operator-initiated actions when prompted via
the LCD.
In nearly all cases, the operator commands described in this manual
consist of a series of keypresses on the keyboard on the front of the
MX1
panel.
Some of the keys have fixed labels and meanings, for example, the key
labelled “NEXT” immediately below the alphanumeric LCD. This key will
be referred to as the
NEXT
key. Similarly, other keys with fixed labels
will be referred to as
RESET
,
MENU
,
OK
, etc.
The four keys to the right of the LCD have meanings that change
depending on what is being displayed. The current meaning of each key
is displayed at the right hand end of the LCD, alongside each key.
For example, a common meaning for
F2
and
F3
is to step through a list,
when they are labelled “
PREV
” and “
NEXT
”. This will be referred to in the
command descriptions as
PREV
F2
and
NEXT
F3
.
The degree to which you can view and control the
MX1
depends on the
current operator Access Level (see Operator Access Levels, Section 1).
Unless indicated otherwise, pressing the
CANCEL
key (or
F
-key
option if applicable) will return the LCD to the previous display.
This manual describes the keyboard of the
MX1
for recalling faults,
disables, and generally operating the panel. All examples and menu
instructions given assume that no alarm is present, as displaying the
alarms will take priority.
Operator Commands
CANCEL
Option
Manual
Examples
