- 3 / 20 -
5.
Operation Controls and Functions
Front Panel
NO.
Name
Function Description
1
OLED screen
Display matrix switching status, input/output port, EDID,
Baud rate, IP Address.
2
Power LED
The LED will illuminate in green when the product is connected
to the power supply, and red when the product is on
standby.
3
Input / Output
buttons
You need to press an output button (1~8) firstly and then
press an input button (1~8) to select the corresponding
input source for the output port.
4
MENU / ENTER
/ UP /DOWN
①
EDID Check:
On the initial OLED display screen, press
“MENU” button to enter the Matrix switching state interface,
then the press “UP/DOWN” button to check the current
EDID information of each HDMI input port.
②
EDID setting:
On the initial OLED display screen, press
“MENU” button to enter the EDID setting interface, press
“UP/DOWN” button to select the required EDID, and press
the “ENTER” button. A prompt “copy to input:” will appear.
Then press “the UP/DOWN” button to select the input port
you need to set and press the “ENTER” button again to
confirm.
③
Baud rate setting:
On the initial OLED display screen,
The press “MENU” button to enter the Baud rate interface,
and
The press “UP/DOWN” button to select the required Baud
rate, and press the “ENTER” button to confirm the setting.
④
IP Address Check:
On the initial OLED display screen,
press the “MENU” button to enter the IP interface, then
press
“UP/DOWN” button to check the current IP address.
Pressing the “MENU” button again will return to the initial
OLED display status.
5
POWER button
Long press the POWER button for 3 seconds to enter the
standby mode, then short press it to wake up the device.
6
IR Window
IR receiver window only receives the IR remote signal
from this product.
7
LOCK button
Short press the LOCK button to lock the front panel
buttons (Except the power button); Press it again to
unlock.
Summary of Contents for VL-MX88-1
Page 1: ...VL MX88 1 8x8 HDMI 2 0 Matrix 18Gbps VER 1 1...
Page 12: ...10 20 Password user admin...
Page 24: ...22 20...