161
Parameter
Description
Delete:
To delete a Group Name to VLAN map entry, check this box. The entry will
be deleted on the switch during the next Save
Group Name:
A valid Group Name is a string of at most 16 characters, which consists
of a combination of alphabets (a-z or A-Z) and integers (0-9). No special character is
allowed. Whichever Group name you try map to a VLAN must be present in Protocol
to Group mapping table and must not be perused by any other existing mapping
entry on this page.
Indicates the ID to which Group Name will be mapped. A valid VLAN ID
ranges from 1-4095.
Port Members:
A row of check boxes for each port is displayed for each Group Name
to VLAN ID mapping. To include a port in a mapping, check the box. To remove or
exclude the port from the mapping, make sure the box is unchecked. By default, no
ports are members and all boxes are unchecked.
Adding a New Group to VLAN mapping entry:
Click this option to add a new entry in
mapping table. An empty row is added to the table. The Group Name, VLAN ID and
port members can be configured as needed. Legal values for a VLAN ID are 1
through 4095. The button can be used to undo the addition of new entry.
Buttons:
Apply –
Click “Apply” to save changes.
Reset-
Click “Reset” to undo any changes made locally and revert back to
previously saved values.
Auto-refresh:
Evoke the auto-refresh icon to refresh the information automatically.
Upper right icon (Refresh):
You can click them to refresh the Protocol Group
Mapping information manually.
