18
2-1.2 Configuration
Parameter
Description
You can identify the system by configuring the contact information, name, and
location of the switch.
Web Interface
To configure System Information in the web interface:
1.
Click System, System Information, then Configuration.
2.
Write System Contact, System Name, System Location information on this
page.
3.
Click “Apply”.
Figure 2-1.2: System Information Configuration
System Contact:
The textual identification of the contact person for this managed
node, together with information on how to contact this person. The allowed string
length is 0 to 255, and the allowed content is the ASCII characters from 32 to 126.
System Name:
An administratively assigned name for this managed node. By
convention, this is the node's fully-qualified domain name. A domain name is a text
string drawn from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space
characters are permitted as part of a name. The first character must be an alpha
character. And the first or last character cannot be a minus sign. The allowed string
length is 0 to 255.
System Location:
The physical location of this node (E.g. telephone closet, 3rd floor).
The allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 32 to 126.
