207
3-19 Easy Port
Easy Port provides a convenient way to save and share common configurations. You
can use it to enable features and settings based on the location of a switch in the
network, and for mass configuration deployments across the network. It’s easy to
implement Voice IP phone, Wireless Access Point, IP Cameras, and more. You can
leverage configuration to run a converged voice, video, and data network to
consider the quality of service (QoS), bandwidth, latency, and high performance.
Web Interface
To configure the Easy Port in the web interface:
1.
Click Configuration and Easy Port.
2.
Set the parameters.
3.
Scroll the “Role” for what kind device you want to set on the Easy Port and
connect to.
4.
Click “Apply” to save the setting.
5.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
NOTE:
The easy port configuration page will not actively display the
status of setting. The page is for configuring each parameter, so it is
correct if the parameter didn’t be modified after the selection of each
item being applied. The modification will be showed on configuration
of individual functionality.
Figure 3-19.1: The Easy Port Configuration
