23
Parameter
Description
User Name:
The name identifying the user. This is also a link to add/edit User.
Password:
To type the password. The allowed string length is 0 to 255, and the
allowed content is the ASCII characters from 32 to 126.
Password (again):
To type the password again. You must type the same password
again in the field.
Privilege Level:
The privilege level of the user. The allowed range is 1 to 15. If the
privilege level value is 15, it can access all groups (e.g. that is granted the fully
control of the device). But others value need to refer to each group privilege level.
User's privilege should be same or greater than the group privilege level to have the
access of that group. By default setting, most groups’ privilege level 5 has the read-
only access and privilege level 10 has the read-write access. For system maintenance
(software upload, factory defaults, and etc.), the user privilege needs to be level 15.
Generally, the privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account and privilege level 5 for a guest account.
