244
RADIUS Accounting Server Configuration
The table has one row for each RADIUS accounting server and a number of columns,
which are:
#:
The RADIUS accounting server number for which the configuration below applies.
Enabled:
Enable the RADIUS accounting server by checking this box.
IP Address/Hostname:
The IP address or hostname of the RADIUS accounting
server. IP address is expressed in dotted decimal notation.
Port:
The UDP port to use on the RADIUS accounting server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS accounting server.
Secret:
The secret - up to 29 characters long - shared between the RADIUS
accounting server and the switch stack.
Authentication Server Configuration
The table has one row for each authentication server and a number of
columns, which are:
#:
The authentication server number for which the configuration below
applies.
Enabled:
Enables the authentication server by checking this box.
IP Address/Hostname:
The IP address or hostname of the authentication
server. The IP address is expressed in dotted decimal notation.
Port:
The TCP port used on the authentication server. If the port is set to 0
(zero), the default port (49) is used on the authentication server.
Secret:
The secret - up to 29 characters long - shared between the
authentication server and the switch stack.
Buttons:
Apply
– Click “Apply” to save changes.
Reset-
Click “Reset” to undo any changes made locally and revert back to
previously saved values.
