34
2-6.3 Communities
Parameter
Description
The function is used to configure SNMPv3 communities. The Community and
UserName are unique. To create a new community account, please check
<Add
New Community>
button. Enter the account information and then check
<Save>.
Max Group Number: 4.
Web Interface
To display the configure SNMP Communities in the web interface:
1.
Click SNMP, then Communities.
2.
Click “Add New Community”.
3.
Specify the SNMP communities parameters.
4.
Click “Apply”.
5.
If you want to modify or clear the setting, then click “Reset”.
Figure 2- 6.2: The SNMPv1/v2 Communities Security Configuration
Delete:
Check to delete the entry. It will be deleted during the next save.
Community:
Indicates that the community access string permit access to SNMPv3
agent. The allowed string length is 1 to 32, and the allowed content is ASCII
characters from 33 to 126. The community string will be treated as security name
and map a SNMPv1 or SNMPv2c community string.
UserName:
The UserName access string to permit access to SNMPv3 agent. The
length of “UserName” string is restricted to 1-32.
Source IP:
Indicates the SNMP access source address. A particular range of source
addresses can be used to restrict source subnet when combined with source mask.
Source Mask:
Indicates the SNMP access source address mask.
