84
3-4.5 MSTI Ports
The section allows the user to inspect and change the current STP MSTI port
configurations.
An MSTI port is a virtual port, which is instantiated separately for each active CIST
(physical) port for each MSTI instance configured on and applicable to the port. The
MSTI instance must be selected before displaying actual MSTI port configuration
options. It contains MSTI port settings for physical and aggregated ports.
Web Interface
To configure the Spanning Tree MSTI Port Configuration parameters in the web
interface:
1.
Click Configuration, Spanning Tree, then MSTI Ports.
2.
Scroll to select the “MST1” or other MSTI Port.
3.
Click “Set” to set the detail parameters of the MSTI Ports.
4.
Scroll to set all parameters of the MSTI port configuration.
5.
Click “Apply” to save the setting.
6.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-4.5: The MSTI Port Configuration
