Viglen BX110 Chassis Quick Start Guide
8
Chapter 3: Removing and installing components
This chapter provides procedures for removing and installing replaceable and/or
upgradeable components in the Viglen BX110 System. Before performing the
procedures, be sure to familiarise yourself with the following “Before You Begin”
information.
Before You Begin
Warnings and Cautions
Read and adhere to all warnings, cautions, and notes in this guide and the
documentation referenced and supplied with the system. If the additional
instructions supplied with the system are inconsistent with these instructions,
contact the supplier to find out how you can ensure that your system meets safety
and regulatory requirements.
WARNINGS
This chapter is intended for qualified technical personnel with
experience installing and configuring systems.
SYSTEM POWER ON/OFF:
The Power button on the system front panel
DOES NOT remove AC power to the system. Some circuitry in the
system may continue to operate even though the front panel Power
button is off. Always disconnect the power cord from the AC power
source or wall outlet before performing any of the procedures in this
guide. Failure to do so can result in personal injury or equipment
damage.
HAZARDOUS CONDITIONS, POWER SUPPLY:
Hazardous voltage,
current, and energy levels are present inside the power supply. There
are no user-serviceable parts inside the power supply; servicing should
be done by technically qualified personnel.