Omnino HS Quick Start Guide – Ver 1.0
10
Step 6:
Plug the video signal cable into the BLUE VGA connector; this is located on the
Interface panel. Both options are shown below.
Omnino HS
– I/O Panel
Step 7:
Your Omnino HS may have an audio card installed (optional). Connect the stereo
speaker cable to the socket labelled 'OUT' or marked with the following icon:
Or
Plug your microphone into the socket labelled 'MIC' or marked with the following
icon:
If your Omnino HS has an ‘on-board’ sound card, the audio ports will be located on
the ‘interface panel’. Connect the stereo speaker cable to the GREEN socket, and
plug your microphone into the PINK socket. Both options are shown below.
Omnino HS
– I/O Panel
DO NOT switch on the Omnino HS until steps 1 to 7 have been completed.