Viglen VX2000 Chassis User Guide
30
Installing a 5¼” Device
The VIG840 can hold up to three 5¼” devices. The below instructions uses a CD-ROM
drive to illustrate how to install a 5¼” device to the VIG840 chassis.
1. Remove a pair of slide rails from the side panel of the drive cage frame.
Figure 30:
Slide Rails
2. Insert both guide pins (Circled in Figure 30) on the slide rail into the mounting holes
of the CD-ROM drive and then secure them in place with screws side by side.
Figure 31:
Securing the Slide Rails to the 5¼” Device
3. Finally, insert the CD-ROM into the 5¼” bay until you hear a click sound.
