H. INSTALLING THE HANDLE
1. Assemble the door handles (#13) to
the door (#14). [SEE FIG.12]
MODEL VG06011
12
DOOR PANEL
OUTSIDE
HANDLE
INSIDE HANDLE
SCREW
METAL WASHER
CLEAR
WASHER
WHITE TUBE
GLASS SUPPORT
THREADED SCREW
FIG.12
METAL
WASHER
G. INSTALLING PRE-CUT BOTTOM DOOR SEAL STRIP
1.
Clean the door glass panel (#14) edge where the door bottom side seal strip (#16) is to be installed with
rubbing alcohol.
2.
[SEE FIG.11]
3.
Verify that the soft flange of the seal strip faces toward the inside of the shower cabin before seal strip
installation.
4.
Install the seal strip according to the diagram.
NOTE: If the seal strip is not flat, use a hair dryer to apply minimal heat and press the seal strip back into position.
14
11
16
14
11
FIG.11
14
OUTSIDE OF
THE CABIN
INSIDE OF
THE CABIN
11
16
16
Summary of Contents for VG06011
Page 14: ...MODEL VG06011 14 VG06011 RIGHT DOOR VG06011 LEFT DOOR ...
Page 23: ...7 1 2 Cf FIG 4 3 4 dessus pour la remettre en position ...
Page 31: ...15 ...
Page 48: ...15 MODELO VG06011 ...