9
MODEL VG06011
FIG.6
THIN
GASKETS
VIEW FROM INSIDE
DOOR (14)
FRONT GLASS
PANEL (6)
HINGE (8)
D. HINGE INSTALLATION
1.
Clean the glass surface on the front glass panel (#6) where the hinges (#10) are to be
installed with rubbing alcohol.
2.
Place gaskets on each side of the front glass panel (#6). Position hinges on the front glass
panel (#6). [SEE FIG.6] Place shim(s) as needed between the glass and the hinge on the
bottom. The metal should not rest on the glass. [SEE FIG.7]
3.
Screw the hinges to the front glass panel with the hex key (supplied).
INSIDE VIEW
FRONT GLASS
PANEL (6)
CLEAR
PVC SHIM
FIG.7
11
SEAL
STRIP (15)
HINGE (10)
FRONT GLASS
PANEL (6)
CLEAR
PVC SHIM
INSIDE VIEW
HINGE (10)
21
18
THIN
GASKETS
7
8
WALL
SIDE
DOOR
SIDE
5
MAKE SURE TO
LEAVE A GAP OF
3/8" [10MM] FROM
THE BOTTOM OF
THE GLASS
FIG.5B
8
5
7
5
8
Summary of Contents for VG06011
Page 14: ...MODEL VG06011 14 VG06011 RIGHT DOOR VG06011 LEFT DOOR ...
Page 23: ...7 1 2 Cf FIG 4 3 4 dessus pour la remettre en position ...
Page 31: ...15 ...
Page 48: ...15 MODELO VG06011 ...