MODEL VG06073
10
FIG.5
10
1
1
D. INSTALLING THE MAGNETIC SIDE SEAL STRIP
1.
Clean all glass panel edges receiving seal strips with rubbing alcohol.
2.
Install the seal strip (#10) according to seal strip diagram. The seal strip should rest 1/16" off of
the floor. [SEE FIG.4] Be aware that the door magnetic seal strip (#10) should have the "A" side
facing out. [SEE FIG.5]
3
NOTE: If the seal strips are not flat, use a hair dryer to apply minimal heat and press the seal strip back into
position.
FIG.4
1
10
10
"B" side
"A" side
1/16"
FLOOR
FLOOR
MAGNETIC SEAL STRIP
SHOULD SIT 1/16" OFF OF
THE FLOOR AT THE FINAL
INSTALLATION
