1. Function and description (technical data)
V2481
V6028
V6029
V6031
1. Load capacity in tonnes
t
1.35
2
3
2
2. Min. height
mm
80
75
120
75
3. Max. height
mm
380
510
450
530
4. Length of frame
mm
500
686
618
940
5. Width of frame
mm
121
262
156
300
6. Length of lever
mm
960
1301
1160
1100
7. Width
mm
240
343
344
373
8. Rubber joint Ø
mm
105
92,5
90
100
9. Front castors Ø
mm
43
60
80
57
10. Rear castors Ø
mm
42
60
60
57
11. Net weight
kg
10
32
31
40
12. Gross weight
kg
11
34
33
42
2. Before use
Raising the load:
• Attach and secure the lever.
• Secure the vehicle with chocks to prevent it from moving.
Use the lever to bring the jack to the desired position.
• Close the valve by turning it clockwise until it stops.
• Use the lever to pump the load to the desired height.
• Immediately secure the load with supports (e.g. ViGOR jack stands V 2477) after raising the load.
Lowering the load:
• Raise the load in order to carefully remove the supports.
• Stick the lever onto the valve and slowly turn anticlockwise until the load lowers. Ensure that the valve
is opened slowly to prevent the load from lowering in jerky movements. If the load cannot be lowered,
use another jack to lower the load and then have the function of the first jack inspected by a specialist.
• Once the load has been lowered, close the valve by turning the lever clockwise.
• Keep these operating instructions. For your own safety, read and follow these instructions. The owner and
user should have current information about the jack at all times for the safe use of this product.
Instructions and safety information must be made available to the user in his or her native language
before this product is used. Ensure that the user is aware of the risks associated with the use of this product.
• If there is any suspicion that the user does not know all of the required safety information, the safety
and operating instructions for this product must be provided to the user in his or her own language.
• This jack is not suitable for use as a transport aid or for lifting caravans, mobile homes or for other
general applications. This jack is only suitable for lifting one side or the rear of a vehicle.
• Never exceed the maximum load. Use this tool only on hard and even floors. Use this tool only for lifting.
• Do not move the jack under load.
• Only use the jack for vehicles as stipulated by the vehicle manufacturer.
• Do not make any changes to the jack.
ViGOR GmbH
•
;
Am Langen Siepen 13-15 • 42857 Remscheid • Germany
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
info@vigor-equipment.com •
^
vigor-equipment.com
ViGOR GmbH
•
;
Am Langen Siepen 13-15 • 42857 Remscheid • Germany
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
info@vigor-equipment.com •
^
vigor-equipment.com
Design and function
