Vigor 1000, Operating Instructions Manual

11

•  The total loading capacity of the Tool Trolley amounts to 314 kg (including unloaded 

weight). Even short term overloading substantially limits the Tool Trolley’s mobility. Durable 

overloading may damage the ball-bearing castors and/or the Tool Trolley.

•  To avoid durable damage to the swivel castors take care not to pull the Tool Trolley – in par-

ticular an overloaded Tool Trolley – over high borders.

•  Do not use the Tool Trolley as working platform or stepladder!

4. Included

On delivery, the ViGOR Tool Trolley is partly assembled. Before first use, both fixed and swivelling 

castors, the handle and the plastic work-top have to be fixed to the Tool Trolley body. 

Included in delivery: 

ViGOR Tool Trolley, plastic work-top, handle, fixed and swivelling castors

5. Storage

The Tool Trolley must be stored according following conditions:

Do not store the Tool Trolley outdoors. Store the Tool Trolley in a dry and dust-free place. 

Do not expose the Tool Trolley to liquids or aggressive substances. 

Storage temperature: -10° up to +45°C • Relative air humidity: max. 60%

6.  Dangers emanating from the Tool Trolley

•  Before each use, check the Tool Trolley for full functional efficiency. Do not use the Tool 

Trolley if its functional efficiency cannot be ensured or if damage is detected. If the Tool 

Trolley is used, although it is not in full working order, you risk severe injuries to persons and 

damage to property.

•  Full functional efficiency is given when:  - the Tool Trolley smooth-running,

- the Tool Trolley does not present any damage.

•  If the Tool Trolley is parked, the brake of the swivel castor must always be blocked. This applies 

particularly on uneven or oblique subsoil. There is a risk of injury if these precautions are not 

observed!

•  The drawers must 

always be locked

 if the Tool Trolley is moved – even for just short ways! 

Unintentional opening of the drawers may cause the Tool Trolley to tip over and may cause 

injury to persons or damage to property standing nearby.

•  If the Tool Trolley is locked with the key, the key must be taken off, in order to ensure safe 

locking and to exclude any damage or danger of injury.

•  The Tool Trolley should always be 

pushed

 in order to avoid injury to persons!

•  Never lift the Tool Trolley at the handle!
•  Wear safety boots!
•  Any service or repair work must be carried out by qualified personnel only. In order to guar-

antee long term operational safety, only original spare parts must be used.

•  For safety reasons any modification of ViGOR Tool Trolleys is strictly forbidden. Any modifica-

tion of the Tool Trolley will result in immediate exclusion from warranty and liability. 

2 For Your Safety