4
Magnetic holder:
Underneath the LED Folding Light a magnetic holder is mounted. It facilitates to fit the light to any iron
surface.
Warning
Electrical energy can cause serious injuries. In order to avoid electrical shock, injuries or fi re the follow-
ing safety instructions have to be observed and respected:
• Please make sure that lead and housing are not damaged. Lights and charging stations that have
been dropped or that are damaged, must be checked by qualified personnel before restarting opera-
tion.
• When laying the power supply lead, please make sure that it does not come into contact with hot or
sharp parts and that it cannot be damaged in another way. The lead is to be laid in such a way that it
does not constitute a risk of stumbling.
• The charging station and work light must not be exposed to water or other liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by qualified technical personnel only. In order to
ensure the working reliability in the long term, always use original spare parts.
• The charging station and/or the work light must not be disassembled. Inappropriate assembly can lead
to a reduction of the functionality, to fire, to electrical shocks and/or to injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is strong enough to cause eye injuries.
• If an extension cord is necessary, it must be sufficiently dimensioned for the charging station. Cables
which are not appropriate for the necessary amperage may overheat.
• When recharging, both the work light and the charging station slightly warm up which does not reduce
their functionality. When working with the work light, appropriate caution is required.
• Only use the work light within the prescribed places, and governed under the current regulations relat-
ing to the working environment and to electrical systems.
Optional accessory
V2347 12 V charging cable
Disposal
For disposal the light and the Lithium-Ion battery must be supplied to the respective public recy-
cling system.
Warranty
Any deviation from the intended use is not allowed and will be considered as improper use. Any claims
against the manufacturer and/or its authorised agents because of damage caused by improper use of
the tool invalid. Improper use means:
• Products that have been modified or repaired by persons not belonging to ViGOR-Equipment.
• Misuse, improper handling, negligence and any deviation from the intended use or from the instruc-
tions and specifications of ViGOR- Equipment or
• Use in combination with any other product, device, component or system that is damaged, may
cause malfunction or is not intended for use in combination with this tool.
CE Conformity
Product: LED Folding Light
Article No.: ViGOR V2316
We declare that the above designated product is in compliance with the following European
Community Directives: Electromagnetic Compatibility 2014/30/EU and Low Voltage Directive 2014/35/EU.
EN 55015:2013+A1:2015
Person authorised to compile the technical file: Sandra Müller, Tel.: +49 (0) 2191 792 319
Date: 07.03.2018
Guido Schmidt
ViGOR GmbH • Am Langen Siepen 13 - 15 • 42857 Remscheid
info@vigor-equipment.de • www.vigor-equipment.de
V 2316 BA
III
.
03.2018/
∞
be/330
2011/65/EU
