Vigor V4324, Operating Instructions Manual

13

2 For Your Safety

3 Design and Function

1. Device components/included in delivery

  This multimeter has been designed according to EN61010-1-2010 and EN61010-2-033
  concerning electronic measuring instruments with an overvoltage category (CATIII) and
 pollution 

2.

  The device is a battery-operated portable 3½-digit digital multimeter for measuring DC and
  AC voltage, DC current and resistance and also for diode continuity testing.

1. Display:

3½-digit, 7 segments, 15 mm high, LCD.

2. Back light:

When this button is pushed, the back light 

of display is switched on. After about 5 

seconds, the back light switches off auto-

matically. Push this button again once to 

switch the backlight on again.

3. Rotary switch:

This switch is used to select functions and 

desired measuring ranges as well as to 

turn on/off the meter.

4. „V.

Ω

. mA“ jack:

Plug-in connector (positive) test lead for 

voltage, resistance and current (except 

10 A) measurements.

5. „COM“ jack:

Plug-in connector for black (negative) test 

lead. 

6. „10A“ jack:

Plug-in connector for red test lead for 10A 

measurement.

7. HOLD button:

When this button is pushed, the most recent 

reading remains displayed and the “H” 

symbol will appear on the LCD until it is 

pushed again.

•  Ensure that during measurement you do not touch the measuring points being measured.
•  The device must be protected from moisture, splash water and the effects of heat.
•  Do not use the device in explosive atmosphere.
•  This product is not a toy! Keep the device away from children.

1

2

3

4

5

6

7