1.Safety precautions
1
2
2.Unpacking your Product
Film & photo scanner
USB cable
Negative Film Holder
Positive Slide Holder
Photo Tray (5
x7
, 4
x6
, 3
x5
)
AC/DC adapter
User's Manual
Important:
Do not expose this product to rain or moisture to preserve
the life of your product.
Caution:
Do not disassemble this unit. To prevent this risk of electric
shock, do not remove cover.
Ventilation:
The device should be situated so that its location or
position does not interfere with its proper ventilation. For
example, the unit should not be situated on a bed, sofa,
rug or similar surface that may block the ventilation openings.
Heat:
The device should be situated away from sources of high
heat such as radiators or stoves.
Cleaning:
We strongly suggest using a clean, dry, non-alcohol cotton
swab to clean the glass surface periodically to produce a
clear image.
Non use period:
The USB cord for the device should be unplugged
from the computer when the unit is left unused for a long
period of time.
USB overloading:
Do not overload the USB connections on your
computer. If you have too many devices connected to your
computer such as a wireless mouse, Media player, mobile
phone or other USB powered devices. There may not be
enough power for the film & photo scanner to operate properly.
Servicing:
The user should not attempt to service the device beyond
those means described in the operating instructions. All other
servicing should be referred to qualified person.
Film Holder:
The design of film holder is follow ISO standard. In some
cases the holes on the film will not match exactly to alignment
of the holder. This is caused by a non-standard camera. In this
case there will be a small black line on the edge of the frame
that can easily be cropped out using the BlazePhoto software.
ISO--
International Organization for Standardization