Features Overview
AUTOMATED
RECEPTIONIST
VIKING
©
VIKING
ELECTRONICS
HUDSON, WI 54016
AUTOMATED
RECEPTIONIST
POWER 13.8 VAC
MODEL AR-1
RECORD
AUDIO INPUT
PWR LED
OFF / NIGHT LED
OFF / NIGHT
LEARN MODE
MUSIC ON
HOLD VOLUME
EARTH GND
MESSAGE
VOLUME
1
2
3
4
5
6
7
8
9
10 11
1 2
CAN COMM.
OFF / NIGHT
MODE
MUSIC ON
HOLD INPUT
C.O. LINE
INPUT
LINE OUT
TO PHONES
Power Input
(13.8VAC
adapter included)
Red Power
Indicator LED
Record Audio Input
(mono, 1/8"/3.5mm)
Line level record input from tape
player, CD, PC sound card, etc.
Note: Touch tone commands
from "LINE OUT TO PHONES"
port are required to start and stop
recording. Caution: Cable must
be removed to allow local or
remote live recording.
Message Volume Control
Music On Hold Volume Control
In Use LED:
Lights to indicate
the phone line is in
use by the AR-1
answering a call or
a phone is off hook.
Off/Night LED:
Lights to indicate
the AR-1 is in the off or night mode.
DIP Switches:
See
DIP
Switch Programming
, pg X.
Music On Hold Input:
Line level input from
radio, etc.
Off/Night Mode:
Connect to
remote switch or Viking model
CTG-1 (with CTGF-BKD
software). With DIP switch 1 OFF,
shorting terminals 6 & 7 will place
unit in "Off" mode. With DIP
switch 1 ON, shorting terminals 6
& 7 will place unit in "Night" mode.
Line Out to Phones:
Connect to
single or multi-line phones or
trunk input of analog PABX/KSU
phone system.
C.O./Phone Line Input:
Connect
to analog phone line, analog phone
system station port, FXS port, etc.
Optional Earth Ground:
To increase surge
protection, fasten a wire from the screw
terminal to Earth Ground (grounding rod,
water pipe, etc.)
CAN Communications:
For multi-line
applications, allowing you to connect up to
63 “slave” units for automatic program-
ming and message updates from a single
“master” unit.
Caution: This connection is
polarity sensitive. See page X section X.
L H
2
