9 |
P a g e
Viking Pure, LLC
511 Pullman Rd., Suite C5 Edgewater, Fl. 32132, USA
© Viking Pure, LLC 2015
Connecting your MiniMAXX
1.
After removing the unit from the shipping container, inspect the unit for any marks
and/or damage that may have resulted from mishandling during freight. If the unit is
damaged report it to UPS or the shipping company involved.
2.
Install unit in the best area, as determined by Pre-Install Site Evaluation Sheet (filled out
and sent to Viking Pure, Distributor or Sales Representative before purchase of unit).
Power connection is a standard wall outlet with ground, 3 prongs. FOR 115VAC AND
230VAC UNITS, USE PROPER OUTLET.
3.
Water connection can be made with the fitting supplied or any other means that has a
shutoff valve. The connection should accommodate the ¼” plastic supply line supplied.
4.
Mount the water filter using the bracket supplied. The filter comes with a fitting installed
on the Outlet end. Water supply should be connected to the inlet on filter.
5.
Route the tubing from the water filter to the MiniMAXX in such a way as to protect the
tubing from damage and cut to size. Then install the tube into the Mini Pure lower right
side as indicated, FILTERED WATER INLET
(Item #5 on Pg. 4 of Manual).
6.
Turn water on and check for any leaks at the water supply or on the water filter, if leaks
occur: turn off water supply and check connection of all fittings to tubes and ensure they
are pressed in firmly as shipment may have loosened some connections.
7.
Add salt to the unit
(see pg. 13 for Adding Salt to Unit)
