IMPORTANT!!!
READ BEFORE USE
HOW TO MASTER RESET
YOUR SAFE?
CHANGE default PIN code 1234 on your
safe or else ANYONE can access your safe!
REGISTER at least 1 fingerprint on you FBI
approved biometric reader up to 34.
NEVER Store the override keys on your
safe inside of your safe!
The Keypad buttons on your safe serves a double duty.
It shows the battery charge level and also a numeric PIN
access and other functions.
If the safe stops reacting on pressing the button "A", close
and open again and restart the Registration process.
www.vikingsecuritysafe.com
| help@vikingsecuritysafe.com
®
This is your Viking VS-37PZ Pistol Gun safe.
Unlock your safe with override key provided. Locate
battery compartment and install the 4 AA batteries.
Place your finger touching both the reader and the
frame around it.
WARNING!
Master Reset will erase all programing and
will bring your safe to Default Mode. You must CHANGE
PIN code from default 1234 to a personal PIN or else
ANYONE may access your safe. Follow by Fingerprint
registration.
1.
1.1.
Locate button “A” on the inside front wall of
your safe.
Press button “A” 3 consecutive times FAST.
You’ll hear short beeps and see keypad flash
green after each press followed by a long
beep after the 3rd/last press.
The keypad buttons will turn solid green
accompanied by a long beep. This confirms
the Master Reset is completed and all data
is erased. Your safe is in default mode and
ready to be programmed.
page 2/4
i
i
A
LED LIGHT
Mount the safe with small space behind.
Otherwise the top of the safe will not spring
open.
LEAVE
SPACE
BEHIND
HOW TO CHANGE PIN
CODE?
Press Inside Button “A”. The Keypad buttons
will flash green twice and 2 beeps will sound.
Enter your NEW 4- digits PIN code Twice
in a Row
. You’ll hear short beeps and the
keypad will flash green between entries
followed by a long beep and solid green light.
This confirms the registration of your NEW
4- digits PIN Code.
NOTE:
If changing the PIN Code fails, for example, if
the 4- digits of the PIN entered are not identical, the
Keypad buttons will turn solid red for 3 seconds and
you’ll hear error beep. If this occurs, repeat step 2.1.
2.
2.1.
