© 2010 Viking Preferred Service
43
Service Diagnostics and Procedures–Disassembly
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Water Filter
The unit has a water filter system designed to filter
a flow rate of 0.78GPM and a maximum pressure of
120 PSI.
To access the water filter French Door:
1.
Open doors, depress filter cover release, and
lower filter cover.
2. Remove filter by turning counterclockwise
Refrigerator Light Bulb
The unit uses standard 40W, 120VAC light bulbs to
illuminate the refrigerator compartment.
To access the light bulb:
1.
Open fresh food door, depress securing tabs
securing light cover and gently pull down cover.
2. Replace light bulb.
Refrigerator Light Housing
To access light housing:
1.
Open doors and remove shelves.
2. Press tabs securing light socket.
3. Lower light socket and disconnect wiring
4. Replace or repair as necessary.
5. Reverse procedure to reinstall.
Water Filter
Filter Cover
Tabs
Tabs
Wiring
Light Housing