© 2010 Viking Preferred Service
19
Diagnostics
Dispensing Diagnostics Service Tests (cont.)
Step 9–User Interface Pad and Button test
Displays the UI buttons matrix on digit 3. Depress each UI button to verify the appropriate status indicators as
shown in the component status indicator column.
ICE + Digits 1, 2, 3, or 4=”1”
Digit 1
Digit 2
Digit 3
Digit 4
(COOLING)=”4”
(FILTER)=”3”
(LOCK)=”2” (OPTIONS)=5
Depress the pads in all combinations to verify the appropriate status indicators as shown in the component
indicator column. Digit 4 displays the status of both water and ice pads.
Ice pad pressed
Water pad pressed
Ice and water pad pressed
Step 11–Dispensing Light
Verify when press “RC Temp Up” or “RC Temp Down” buttons the dispenser lighting cycles between maximum to
minimum output levels.
Not Available
2
–
5
0 9
1
Press Both
to activate
–
–
+
SET
˚F / ˚C
Indicator
Column
3
–
˚F / ˚C
4
–
SET
˚F / ˚C
1
2
3
11
Press Both
to activate