© 2010 Viking Preferred Service
43
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Freezer Thermistor
The unit use a NTC sensor to regulate temperature
in the freezer compartment.
To access the thermistor:
1. Open door and remove basket.
2. Remove 1/4” securing screw.
3. Disconnect wiring and remove sensor.
4. Repair or replace sensor.
5. Reverse procedure to reinstall.
Lower Freezer Light bulb
The unit uses a standard 40W, 120VAC light bulb to
illuminate the lower freezer compartment.
To access the lower light bulb:
1.
Remove upper freezer shelves.
2. Remove securing screw and remove bulb cover.
4. Remove/replace light bulb.
5. Reverse procedure to reinstall.
Screw
Wiring
Screw