© 2010 Viking Preferred Service
9
Operation
Using the Controls
Temperature Control Adjustment and Cooling
On/Off
The refrigerator and freezer control buttons are
located on the dispenser panel.
To turn cooling off, press and hold the “LOCK” and
“OPTIONS” buttons at the same time for three
seconds. Press and hold “LOCK” and “OPTIONS”
again to turn cooling on. Your refrigerator and
freezer will not cool when cooling is off.
IMPORTANT:
To avoid unintentionally locking the
dispenser or changing other settings, be sure to press
both buttons at exactly the same time.
For your convenience, your refrigerator and freezer
controls are preset at the factory. When you first
install your refrigerator, make sure that the controls
are still set to the “mid-settings.”
To view set points, press the “COOLING” button
on your dispenser panel. The factory recommended
set points are 0°F (-18°C) for the freezer and 37°F
(3°C) for the refrigerator.
IMPORTANT:
UÊÊ Ê7>ÌÊÓ{Ê ÕÀÃÊLivÀiÊÞÕÊ«ÕÌÊv`ÊÌÊ
the refrigerator. If you add food before the
refrigerator has cooled completely, your food
may spoil.
Note:
Adjusting the set points to a higher (colder)
than recommended setting will not cool the
compartments any faster.
UÊÊ ÊvÊÌ iÊÌi«iÀ>ÌÕÀiÊÃÊÌÊÜ>ÀÊÀÊÌÊV`ÊÊÌ iÊ
refrigerator or freezer, first check the air vents to
be sure they are not blocked before adjusting the
controls.
UÊÊ Ê/ iÊ«ÀiÃiÌÊÃiÌÌ}ÃÊà Õ`ÊLiÊVÀÀiVÌÊvÀÊÀ>Ê
household usage. The controls are set correctly
when milk or juice is as cold as you like and when
ice cream is firm.
UÊÊ Ê7>ÌÊ>ÌÊi>ÃÌÊÓ{Ê ÕÀÃÊLiÌÜiiÊ>`ÕÃÌiÌðÊ
Recheck the temperatures before other
adjustments are made.
UÊÊÊ Ê/ iÊ`ë>ÞÊÃVÀiiÊÊÌ iÊ`ëiÃiÀÊVÌÀÊ«>iÊ
has a backlight, which will turn off automatically
when the control buttons have not been used for
30 seconds or more. When the backlight is off, the
first press of a control button will only reactivate
the backlight, without changing any settings.
Within 30 seconds after the backlight has been
reactivated, additional presses of control buttons
will change the applicable settings.
Adjusting the Controls
To adjust the set points, press and hold the
“COOLING” button for three seconds. When
adjust mode is activated, set points and adjusting
information will appear on the display screen.
Note:
To view Celsius temperatures, press the
“FILTER” button when adjust mode is activated.
To return the display setting to Fahrenheit, press
“FILTER” again.
Refrigerator Controls
When adjust mode is activated, the LOCK
and OPTIONS buttons adjust the refrigerator
compartment temperature. The set point range for
the refrigerator is 33°F to 45°F (0°C to 7°C).
UÊÊ *ÀiÃÃʺ"»ÊÌÊÜiÀÊÌ
iÊÃiÌÊ«Ì°
UÊÊ *ÀiÃÃʺ"*/" -»ÊÌÊÀ>ÃiÊÌ
iÊÃiÌÊ«Ì°
