10
1
3
2
4
5
6
7
8
8
Threading the upper looper (green)
1. Pass the thread from back to front through the thread guide
on the thread stand (1).
2. Pull the thread from left to right under the thread guide at
the back on the top cover (2). Use the tweezers to make the
threading easier.
3. While holding the thread with both hands, pass it between the
tension discs and pull it down to make certain it is properly
placed between the tension discs (3).
4. Thread the looper area of the machine following the green
color coded thread guides (4-7). Use the tweezers to make the
threading easier.
5. Use the tweezers to bring the thread behind the lower looper
and thread into the hole in the upper looper from front to
back (8).
6. Pull about 10 cm of thread through the looper and it place to
the back of the stitch plate.