Viking ME 339 Instruction Manual Download

Page: 37 / 498

0478 121 9918 B - EN

Remove accumulated clipping deposits
using a stick. Clean the underside of the
mower with water and a brush.

Never use high-pressure cleaners and do
not clean the machine under running water
(e.g. using a garden hose).
Do not use aggressive cleaning agents.
These can damage plastics and metals,
impairing the safe operation of your
VIKING machine.

In order to prevent fire hazards, keep the
area around the air vents between the
motor hood and housing free from
e.g. grass, straw, moss, leaves or
escaping grease.

Maintenance operations:

Only maintenance operations described in
this instruction manual may be carried out.
Have all other work performed by a
specialist dealer.
If you do not have the necessary expertise
or auxiliary equipment, please

always

contact a specialist dealer.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.

Only use tools, accessories or
attachments approved for this machine by
VIKING or technically identical parts.
Otherwise, there may be a risk of
accidents resulting in personal injury or
damage to the machine. If you have any
questions, please consult a specialist
dealer.

The characteristics of original VIKING
tools, accessories and spare parts are
optimally adapted to the machine and the
user's requirements. Genuine VIKING

spare parts can be recognised by the
VIKING spare parts number, by the
VIKING lettering and, if present, by the
VIKING spare parts symbol. On smaller
parts, only the symbol may be present.

Always keep warning and information
stickers clean and readable. Damaged or
missing stickers must be replaced by new,
original plates from your VIKING specialist
dealer. If a component is replaced with a
new component, ensure that the new
component is provided with the same
stickers.

Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.

Ensure that all nuts, pins and screws (in
particular the blade fastening screw) are
securely tightened so that the machine is
in a safe operating condition.

Check the complete machine and the
grass catcher box for wear or damage on
a regular basis, particularly before
extended periods when the machine is not
in use (e.g. over winter). For safety
reasons, worn or damaged parts must be
replaced immediately to ensure that the
machine is always in a safe operating
condition.

Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.

Regularly check that the mowing blade is
securely fastened and is not damaged or
worn.

4.7 Storage for prolonged periods
without operation

Store the cooled machine in a dry and
locked place.

Ensure that the machine is protected from
unauthorised use (e.g. by children).

Thoroughly clean the machine before
storage (e.g. winter break).

Store the machine in good operational
condition.

4.8 Warning – dangers caused by
electrical current

Never use a damaged extension cable.
Replace defective cables with new ones
and never repair extension cables.

Never use the machine if the cables are
damaged or worn. Check the power cable
in particular for damage and ageing.

Maintenance and repair work on power
cables must only be performed by
specially qualified technicians.

Danger of electric shock!

Do not connect a damaged cable to the
mains and only touch a damaged cable
once it has been disconnected from the
mains.

Warning:
Risk of electric shock!

Particularly important for
electrical safety are the
power cable, mains plug,
On / Off switch and
electric cable. Damaged cables,
connectors and plugs, or electric
cables that do not conform to
regulations must not be used, to
prevent any risk of electric shocks.

Viking ME 339, Instruction Manual

Search results

Summary of Contents for ME 339

Reviews:

Related manuals for ME 339

Brands by name

Popular brands