Viking MI 422 Instruction Manual Download

Page: 118 / 388

0478 131 9923 B - EN

116

mower and docking station, as well as for
resetting the machine to the default
settings; time lock is active.

Medium

Same as for "Low", however, settings can
also only be changed following entry of the
PIN code.

High

Same as for "Medium", but an anti-theft
alarm is enabled as well as the PIN code
query.

●

Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.

Reset lock

PIN code query prior to resetting the
machine to the factory defaults.

Connection lock

PIN code query prior to linking of the
robotic mower and docking station.

Time lock

PIN code query for changing a setting if no
PIN code has been entered for more than
one month.

Setting prot.

PIN code query when settings are
changed.

Anti-th. alarm

If the mower is lifted by the handle for
longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.

3. Change PIN code:

The 4-digit PIN code can be
changed if required.

●

First enter the old PIN code and confirm
with OK.

●

Then enter the new 4-digit PIN code
and confirm with OK.

4. Start signal:

For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.

5. Alarm signal:

For switching on and off the acoustic
signal that sounds when the robotic
mower hits an obstacle.

6. Menu signal:

For switching on and off the acoustic
click that sounds when a menu is
opened and a selection is confirmed with
OK.

7. Child lock:

For switching on and off the device that
prevents the mowing blade from being
activated when the machine is being
played with.

Function:
If the impact sensor is triggered several
times in succession within a short time (for
example when a child is playing with the
robotic mower), the mowing blade is
switched off and the robotic mower stops
with an appropriate message.

If the impact sensor is not triggered again,
the robotic mower continues automatic
mowing after a few seconds.

8. Keylock:

When the keylock is switched on,
the buttons on the display can
only be operated if the

Back

button is pressed and held and the
control pad is then pressed

forwards

The keylock is activated 2 minutes after
the last button has been pressed.

9. Link iMow and dock:

Following initial operation, the
robotic mower can only be operated
in conjunction with the installed docking
station.
Following a replacement of the docking
station or of electronic components in the
robotic mower or for operation of the
robotic mower on an additional mowing
area using a different docking station, the
robotic mower and docking station must be
linked.

●

Install the docking station and connect
the perimeter wire. (

9.4), (

9.6)

VIKING recommends that the
"Low", "Medium" or "High" safety
levels be set.

The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".

VIKING recommends making a
note of the changed PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit

master

code

is required, otherwise

automatic operation is switched off.
For the creation of a master code,
you must provide your VIKING
specialist dealer with the 9-digit
serial number and the 4-digit date,
which are displayed in the selection
window.