0478 131 9923 B - EN
132
Insert the puller (K) and turn anti-clockwise
to the stop.
Support the machine with one hand.
Remove the carrier plate (1) by pulling on
the puller (2).
Installing the carrier plate:
Thoroughly clean the blade shaft (1) and
the mounting on the carrier plate (2). Push
the carrier plate as far as possible onto the
blade shaft.
●
15.7 Finding a wire break
Remove the docking station cover and
disconnect the right perimeter wire
end (1).
The following instructions describe how to
search for a wire break in a clockwise
direction, i.e. the perimeter wire is followed
in a clockwise direction starting at the
docking station. The search can also be
performed in an anti-clockwise direction if
necessary, however the left perimeter wire
end must then be disconnected.
●
Remove the robotic mower from the
docking station.
●
In the "Service" menu, select the "Find
wire break" entry and confirm with OK.
(
In the event of a wire break, the red
LED on the docking station flashes
rapidly. (
message appears in the display of
the robotic mower.
If a wire break cannot be found as
described, contact your VIKING
specialist dealer.
Summary of Contents for MI 422
