99
DE
FR
NL
IT
EN
0478 131 9923 B - EN
●
After completing this installation
work, press the OK button on the
display.
Lift the robotic mower slightly by the
carrying handle (1) to relieve the weight on
the drive wheels. Push the machine,
resting on its front wheels, into the docking
station.
Then press the OK button on the
display.
9.5 Routing the perimeter wire
Fasten the perimeter wire (1) to the ground
on the
left
A
or
right
B
as appropriate,
next to the floor plate, directly next to a
wire outlet, using a fixing pin (2).
Provide a free wire end (1) with a length of
approx. 1 m.
If an external docking station has
been installed, VIKING
recommends defining at least one
starting point outside the corridor to
the docking station after initial
installation is complete. The starting
frequency should be defined so that
0 of 10 mowing operations (0/10)
are started at the docking station
(starting point 0). (
If the battery is discharged, a
plug symbol appears instead
of the battery symbol at the
top right corner of the display after
docking and the battery is charged
while the perimeter wire is being
routed. (
Please read and observe the entire
"Perimeter wire" section before
performing wire routing. (
In particular,
plan
the routing,
observe the
wire clearances
and
install
no-go areas
,
reserve wire
,
linking sections
,
secondary
areas
and
corridors
during wire
routing.
Summary of Contents for MI 422
