Viking MI 422 Instruction Manual Download

Page: 129 / 388

127

0478 131 9923 B - EN

Closing the flap:

Carefully fold the flap downwards and
allow to engage.

14.3 Adapting the programming

The current programming can be seen in
the

Mowing plan

. (

10.6)

The mowing plan is calculated based on
the size of the mowing area during
installation or during the creation of a new
mowing plan.

The

active times

and the

mowing

duration

can be changed individually, the

required mowing operations themselves
are automatically distributed over the
possible active times. If required, several
mowing or charging operations can run
during an active time. If required, the edge
of the mowing area can be cut
automatically at regular intervals.
(

10.14)

Up to three different active times per day
are possible. (

10.6)

If the robotic mower has to travel to
specific areas of the mowing area, starting
points must be defined. (

10.15)

Changing the

active times

: (

10.7)

– Additional active times for further

mowing operations.

– Adapting the time window in order, for

example, to prevent mowing during the
morning or night.

– Omitting individual active times

because the mowing area is e.g. being
used for a party.

Extending the

mowing duration

: (

10.8)

– There are areas which are not mown

sufficiently, e.g because the mowing
area has lots of corners.

– Intensive grass growth during the

growing period.

– Particularly dense lawn.

Reduction of the

mowing duration

(

10.8)

– Reduced grass growth due to heat, cold

or dryness.

Creation of a

new mowing plan

: (

10.6)

– The size of the mowing area has been

changed.

New installation

: (

10.14)

– New location of the docking station.

– Initial operation on a new mowing area.

14.4 Automatic mowing

●

Switching on automatic
mowing:
When automatic mowing is
switched on, the Automatic
symbol appears next to the battery
symbol in the display. (

10.5)

●

Starting

mowing operation

The mowing operations are
automatically distributed between the
available active times. (

10.7)

●

Ending

mowing operation

When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (

14.6)

A running mowing operation can be
ended manually at any time using the

STOP button

. (

5.1)

14.5 Mowing independently of active
times

Mowing areas with docking station:

●

Activate the robotic mower upright in
the docking station. This also activates
the docking station.

●

In order to mow a part of the mowing
area that can only be reached via a

corridor

, carry the robotic mower there.

●

Immediate mowing:
Call up the command

Start

mowing

(

10.5).

The mowing operation starts
immediately and continues until the
selected time.

The opened flap can be removed
upwards from the machine. This
design is implemented for safety
reasons: This ensures that the
machine cannot be lifted and
carried by the flap.

The robotic mower can only be
operated when the flap is fully
engaged.

Under certain circumstances (e.g.
warm weather or generous time
window), not all the active times
may be necessary for optimal lawn
care.

Mowing areas that the robotic
mower reaches via a

corridor

are

only mown if starting points have
been defined in the relevant area.