91
DE
FR
NL
IT
EN
0478 131 9923 B - EN
Never allow the robotic mower to operate
unattended if you know that animals or
persons, particularly children, are in the
vicinity.
Caution – risk of injury!
Never put hands or feet on or
underneath rotating parts.
Never touch the rotating blade.
Before thunderstorms, or if there is a
danger of lightning strikes, disconnect the
power supply unit from the mains. The
robotic mower must not be operated.
The robotic mower must never be tilted or
lifted when a motor is running.
Never attempt to change settings on the
machine when one of the motors is
running.
MI 422:
For safety reasons, the machine (MI 422)
must not be used on slopes with an
inclination of more than 19,3° (35 %).
Risk of injury!
A slope inclination of 19,3°
corresponds to a vertical height increase
of cm at a 100 cm horizontal distance.
MI 422 P:
For safety reasons, the machine (MI 422
P) must not be used on slopes with an
inclination of more than 21,8° (40 %).
Risk of injury! A slope inclination of
21,8° corresponds to a vertical height
increase of 40 cm at a 100 cm horizontal
distance.
Beware of the cutting tool
running on for several seconds
before coming to a standstill.
Press the
STOP button
during running operation
– before opening the flap.
Activate the
disabling device
– before lifting or carrying the machine,
– before transporting the machine,
– before removing blockages,
– before carrying out any work on the
mowing blade,
– before checking or cleaning the
machine,
– after hitting a foreign object or if the
robotic mower begins to vibrate
excessively. In these cases, check the
machine, in particular the cutting unit
(blade, blade shaft, blade fastening) for
damage and carry out the necessary
repairs before restarting and working
with the machine.
Before leaving the machine unattended,
the safety settings of the robotic mower
must be adapted so that it cannot be
operated by unauthorised persons.
(
Do not lean forward and always ensure
that you maintain your balance and a firm
footing on inclines when operating the
machine and its peripherals. Always walk,
do not run.
6.9 Maintenance and repairs
Before starting cleaning, repair
or maintenance operations,
activate the disabling device
and park the robotic mower on
firm and level ground.
Disconnect the mains plug of
the power supply unit before
performing any work on the
docking station and the
perimeter wire.
Allow the robotic mower to cool down for
approx. 5 minutes before performing any
maintenance operations.
The power cable must only be repaired or
replaced by authorised electricians.
Risk of injury!
Strong vibration is normally an
indication of a fault.
In particular, the robotic mower
must not be operated with a
damaged or bent blade shaft or
mowing blade.
If you do not have the appropriate
expertise, have the necessary
repairs carried out by a specialist
dealer (VIKING recommends
VIKING specialist dealers).
Summary of Contents for MI 422
