10
BAKE (Two-Element Bake)
Use this setting for baking, roasting, and casseroles.
CONV BAKE (Convection Bake)
Use this setting to bake and roast foods at the same time with minimal taste transfer.
TRU CONV (TruConvec™)
Use this bake setting for multi-rack baking for breads, cakes, cookies
(up to 6 racks of cookies at once).
CONV ROAST (Convection Roast)
Use this setting for roasting whole turkeys, whole chickens, hams, etc.
CONV BROIL (Convection Broil)
Use this setting to broil thick cuts of meat.
HI BROIL
Use this setting for broiling dark meats at 1” thickness or less where rare or medium doneness is desired.
MED BROIL
Use this setting for broiling white meats such as chicken or meats greater than 1” thick that would be over-browned in high
broil.
LOW BROIL
Use this setting for delicate broiling such as meringue.
SELF CLEAN
Use this function to clean oven.
Convection Dehydration (TRU CONV)
Use this function to dehydrate fruits and vegetables.
Convection Defrost (TRU CONV)
Use this function to defrost foods.
Proof (Left oven on 48”W. models)
Use this setting to allow yeast dough to rise.
Note:
For more information on oven functions see “Operation” section.
Oven Functions and Settings
Lighting Burners
All burners are ignited by electric ignition. There are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the appropriate control knob counter clockwise to any position.
This control is both a gas valve and an electric switch. Burners will ignite at any “ON” position with the
automatic re-ignition system. If the flame goes out for any reason, the burners will automatically reignite if
the gas is still flowing. When gas is permitted to flow to the burners, the electric igniters start sparking. On
all surface igniters you should hear a “clicking” sound. If you do not, turn off the control and check that the unit is plugged in
and that the fuse or circuit breaker is not blown or tripped.
Within a few moments, enough gas will have traveled to the burner to light. When the burner lights, turn the burner control to
any position to adjust the flame size. Setting the proper flame height for the desired cooking process and selecting the correct
cooking vessel will result in superior cooking performance, while also saving time and energy.
Surface Operation
