Viking VINV600, Manual

1

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR 
INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.  Use this unit only in the manner intended by the manufacturer. 

If you have questions, contact the manufacturer or your 
distributor.

2.  Before servicing or cleaning unit, switch power off at service 

panel and lock the service disconnecting means to prevent 
power from being switched on accidentally. When the service 
disconnecting means cannot be locked, securely fasten a 
prominent warning device, such as a tag, to the service panel.

3. Installation work and electrical wiring must be done by a 

qualified person(s) in accordance with all applicable codes 
and standards, including fire-rated construction codes and 
standards.

4.  Sufficient air is needed for proper combustion and exhausting 

of gases through the flue (chimney) of fuel burning equipment 
to prevent backdrafting. Follow the heating equipment 
manufacturer’s guidelines and safety standards such as 
those published by the National Fire Protection Association 
(NFPA), and the American Society for Heating, Refrigeration 
and Air Conditioning Engineers (ASHRAE), and the local code 
authorities.

5. When cutting or drilling into wall or ceiling, do not damage 

electrical wiring and other hidden utilities.

6.  Ducted fans must always be vented to the outdoors.
7.  Do not use this unit with an additional speed control device.
8.  To reduce the risk of fire, use only steel ductwork.
9.  This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units  unattended at high settings. 

Boilovers cause smoking and greasy spillovers that may ignite. 
Heat oils slowly on low or medium settings.

2. Always turn hood ON when cooking at high heat or when 

cooking flaming foods.

3.  Clean ventilating fans frequently. Grease should not be allowed 

to accumulate on fan or filter.

4.  Use proper pan size. Always use cookware appropriate for the 

size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE 
EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE 
FOLLOWING:*

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, 

or metal tray, then turn off the burner. BE CAREFUL TO 
PREVENT BURNS. If the flames do not go out immediately, 
EVACUATE AND CALL THE FIRE DEPARTMENT.

2.  NEVER PICK UP A FLAMING PAN - You may be burned.
3. DO NOT USE WATER, including wet dishcloths or towels - 

violent steam explosion will result.

4.  Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you 

already know how to operate it.

B.  The fire is small and contained in the area where it started.
C. The fire department is being called.
D.  You can fight the fire with your back to an exit.
* Based on “Kitchen Fire Safety Tips” published by NFPA.

CAUTION

1. For general ventilating use only. Do not use to exhaust 

hazardous or explosive materials and vapors.

2. To avoid motor bearing damage and noisy and/or 

unbalanced impellers, keep drywall spray, construction dust, 
etc. off power unit.

3. Your ventilator motor has a thermal overload which will 

automatically shut off the motor if it becomes overheated. 
The motor will restart when it cools down. If the motor 
continues to shut off and restart, have the hood serviced.

4. Please read specification label on product for further 

information and requirements.

Model VINV600 Ventilator Kit

!

Blower Dimensions
9.50 x 8.50 x 8.50

MOUNTING PLATE CONFIGURATIONS:

020970-000
USE ON DCWH30421, DCWL33421, 
DCWN3042, DTWS 30" THRU 42", DBCV 30" 
THRU 42" HOODS

020971-000
USE ON VCWH & VCIH 30" THRU 42" HOODS

020972-000
USE ON DCWH, DCIH, DCWL, DCWN, DTWN 
36" THRU 42", VWH, VIH, VBCV, VICV 24" 
THRU 42" HOODS

050722-000

USE ON VBCV53638 AND VBCV54238 
HOODS

FOR USE ONLY WITH

VIKING HOOD MODELS *

DCWH, DCWL, DCIH, DLWN, DTWS, 

DTWN, DBCV, DICV, VCIH, VWH, VIH, 

VBCV, VICV

* Contact your local Viking dealer for specific 

compatibility information.