mouNtiNG iNstruCtioNs
It is recommended to bolt down the safe.
Note:
The safe may be mounted to a wall or floor. Be aware of the load bearing. Failure to do so can result in
personal injury and/or damage to property. Use appropriate tools when performing work and always use eye
protection
•
Wall Mounting
-
Do not mount the safe without anchoring to the wall
-
Find the studs in the wall, at your desired location. Most studs are
16 inches or 24 inches apart
-
Check the wall for concealed wires or pipes
-
Measure the location of the pre-set drill holes; mark their exact
position onto the wall ensuring that the studs or anything else behind
will not interfere
-
Drill the appropriate size holes for the anchors you are using
-
Carefully press the anchor into the holes at this time
-
Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely.
•
Floor Mounting
-
Use proper drill tools depending on the type of floor you are mounting the safe (wood, tile, or concrete)
-
Measure the location of the pre-set drill holes; mark their exact position onto the floor
-
Drill the appropriate size holes for the anchors you are using
-
Carefully press the anchor into the holes at this time
-
Mount the safe by running screws from inside of the safe and securing to anchors; ensure the safe is mounted
securely.
CAre AND mAiNteNANCe
To maximize the security and performance of the safe, keep Glass Fingerprint Scanner
f
clean
•
Use a dry cloth to remove any smudges or prints off the Fingerprint Scanner after use
•
Use gentle cleaning agents to clean the safe and Glass Fingerprint Sacnner
•
Test registered fingerprints and PIN code every 6 months
•
Keep liquids away from the control panel. Spills on the control panel will cause damage and possibly electric shock
•
Secure safe in a proper area to prevent from falling and causing damage or injury
•
DO NOT disassemble the product. For all repairs, contact Viking Security Safe Customer Service
page 4/4
www.vikingsecuritysafe.com
| vikingsecuritysafes@live.com | 650-539-9482
Mounting Holes
*Actual Model may vary
Viking Security Safe
wArNiNG
Never store firearms and ammunition together. The safest protection against accidents involving
children is to store your firearm unloaded in an approved Firearm Safety Lock Box, with ammunition
stored separately.
