User's Manual
ARCOVIS 3000 S/R
Villa Sistemi Medicali
Pag. 18/76 - Rev. C
[File:201175-G-01-01.doc]
2.4. Fluoroscopy control footswitch
The footswitch is enabled only in fluoroscopy mode.
The fluoroscopy control footswitch consists of a double-step pedal and two single-step ones.
The functions in the different modes are:
1. Left pedal (two steps):
Fluoroscopy Mode:
1° step:
fluoroscopy control
.
2° step:
image storage
; in continuous
fluoroscopy the current image is stored.
2
.
Right pedal (a step):
Pulsed fluoroscopy mode.
3. Third pedal (a step):
Fluoroscopy mode:
"snapshot"
control
(high-contrast
exposure with reduced background noise).
Fig. 13
2.5. Handswitch for radiography / fluoroscopy control
The control handswitch is made of a two-
steps switch.
Radiography mode:
1° step:
preparation control
.
2° step:
emission control
.
In radiography mode it is possible to press
immediately the exposure control (2° step),
with an emission delay due to the anode
starting phase
(only for rotating anode version)
.
It is possible to control Fluoroscopy and
Storage even with the radiography
handswitch.
Fluoroscopy mode:
1° step:
fluoroscopy control
.
2° step:
image storage
.
Normally the function is enabled. In order
to disable it, it is necessary Service
intervention.
Fig. 14
1
3
2
