Villa Sistemi Medicali
ARCOVIS 3000 S/R
User's Manual
[File:201175-G-01-01.doc]
Rev. B - Pag. 25/76
3.2. Connection between monitor trolley – mobile stand
Only for version with monitor trolley
The connection between these parts of ARCOVIS 3000 S/R is performed through a
multipolar connector with bayonet connection.
On “Base Trolleys”, the cable is fixed permanently from the monitor trolley side, whilst it is
sectionable from the unit side.
On “High Configuration” trolley, the cable is sectionable both from the unit side and the
trolley side
.
F
OR A CORRECT CONNECTOR INSERTION
:
•
H
OLD THE SOCKET CONNECTOR IN ORDER TO MAKE LINED UP THE YELLOW ARROWS ON THE
PARTS TO BE JOINED
(
END TO END
)
•
T
AKE CARE OF INSERTING THE SOCKET CONNECTOR IN ORDER TO BE THE MOST POSSIBLE
PARALLEL TO THE FIXED CONNECTOR
. A
VOID OBLIQUE INSERTIONS
.
•
T
URN CLOCKWISE THE RUBBER RING NUT OF THE SOCKET CONNECTOR TILL HEARING THE
CLICK THAT ENSURES THE SEAL
Fig. 17
Handle the connectors with care.
Don't unplug by pulling the cable but grip the plug body.
